Our Products

G-Grout MF-8 For Cementation

Microfine Cementitious Grouting Compound G-GROUT MF-8

Inception: G- GROUT MF-8 is a prepacked, highly fluid, single component cementitious grout used in Microfine Cement Additives.

G- GROUT MF-8 powder is made using a PSD technology that allows for easy injection and effective deep fine cracks, pores, and voids. Its particle size is much finer than that of other hydraulically setting materials. It is manufactured in cutting-edge manufacturing plants under controlled conditions, resulting in excellent filling quality.

Purpose: G- GROUT MF-8 can be used to inject and grout in rock, soil, concrete, and masonry, as well as to fill joints, cracks, and holes. The MF-8 can work on both vertical and horizontal surfaces. When mixed with water, MF-8 is a ready-to-use dry-blend mortar based on cement modified with organic additives that harden without shrinkage.

Product Details

Microfine Cementitious Grouting Compound G-GROUT MF-8  

INCEPTION G- GROUT MF-8 is a prepacked, highly fluid, single component cementitious grout.

G- GROUT MF-8 powder is made using a PSD technology that allows for easy injection and effective deep fine cracks, pores, and voids. Its particle size is much finer than that of other hydraulically setting materials. It is manufactured in cutting-edge manufacturing plants under controlled conditions, resulting in excellent filling quality.

PURPOSE  G- GROUT MF-8 can be used to inject and grout in rock, soil, concrete,, and masonry, as well as to fill joints, cracks, and holes. The MF-8 can work on both vertical and horizontal surfaces. When mixed with water, MF-8 is a ready-to-use dry-blend mortar based on cement modified with organic additives that harden without shrinkage.

BENEFITS

  • G-GROUT MF-8 can be injected using standard cement grouting equipment
  • It is compatible with the majority of admixtures used to speed up or slow down the setting time.
  • All structural components are supported.
  • Fill voids in concrete structures, control or prevent leakage in structures, and strengthen weak structures.
  • Non-hazardous and non-toxic
  • Environmentally friendly and cost-effective.

TECHNICAL SPECIFICATION

Properties                   G-Grout Value

Consistency                Dry Powder

Colour                          Grey

METHODS OF USES

Pre-process:

The substrate must be thoroughly cleaned all the way down to the load-bearing grain structure. Before grouting, the substrate should be rinsed until saturated to remove excess water.

Mixing:

To avoid air pockets, MF-8 should be mixed with a slowly rotating mixer. First, add 2/3 of the total amount of water required. After a brief mixing period, add the remaining water. It should be blended for about 6 minutes. Vertical and overhead surfaces with plastic consistency: Per 20 kg bag, 4 liters of water As needed, liquid consistency for injection.

PACKAGING G-GROUT MF-8 can be purchased in Bulk Jumbo bags with a plastic inner liner. The product is also available in plastic line bags weighing 25 kg.

STORAGE G-GROUT MF-8 has an indefinite shelf life when stored properly. It, like cement, must be kept free of contaminants and moisture. In a clean, dry storage silo, the product can be stored in bulk. When stored in dry conditions between 15-25°C and protected from heat, frost, and direct sunlight, the original packaging has a shelf life of at least 12 months.

SAFETY INFORMATION Extensive testing has revealed that G-GROUT MF-8 is non-toxic and environmentally safe. G-GROUT MF-8 poses no known significant health risks, but high dust concentrations may cause irritation. It is strongly advised to wear appropriate protective clothing, gloves, and eye/face protection. If you come into contact with your eyes, immediately rinse them with plenty of clean water and seek medical attention.

Delivery in India: The best products are delivered to customers by Guru Corporation, which also offers the best transportation services. Our plant manager examines every item that is about to be shipped to ensure proper manufacture and packing. Due to a large number of orders, materials frequently experience a few-day delay. If there is a significant delay in the dispatch of your order, we will contact you by phone or email.

Delivery Outside India: For export shipments, we use the best transportation network on a basic FOB, CNF, or CIF basis. Because of the container imbalance, which makes it difficult for the trade to get equipment space on vessels, the specified stuffing day and vessel plan are only indicative and subject to change without prior notice in light of volume gathering, equipment, and space accessibility.

Guru Corporation | Ahmedabad, Gujarat, India

We are the leading Manufacturer & Exporter of all type of Steel Fluxes, Construction cement additives materials . The Group was established in the year 2006 and has a successful record of accomplishment for the past 15 years.

INQUIRY
1
Enquiry to Guru Corporation
Contact Us : +91-99099 87033
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right
Corporate Communication
Guru Corporation
B-906, Infinity Towers, Corporate Road, Prahladnagar, Ahmedabad 380015, Gujarat, India

WeCreativez WhatsApp Support
Our customer support team is here to answer your questions. Ask us anything!
👋 Hi, how can I help you ?